From its first 3D-guided slipform pavers to AutoPilot 2.0, Wirtgen continues to advance automation in road construction
In the mid-1990s, Wirtgen began developing technology that would change how slipform pavers are guided on construction sites.
Today, its AutoPilot 2.0 system uses satellite positioning and digital construction models to automatically control steering and slope, eliminating the need for conventional stringlines.
Development of the technology began in 1996, when Wirtgen became involved in a project to develop slab-track construction methods for high-speed rail.
The technology would eventually be used in the construction of the high-speed rail link between Frankfurt and Cologne. The track was designed to use concrete slabs instead of conventional sleepers and ballast. This required concrete surfaces to be paved with an unprecedented degree of precision.
Leica Geosystems and Wirtgen collaborated on the development of a measurement and control system that integrated surveying technology and machine control through a 3D interface.
The original system was developed using a modified Wirtgen SP 500 slipform paver. At the time, Leica Geosystems had started to introduce motorized total stations capable of automatically tracking moving targets with high precision.
More news from the Wirtgen Group:
- How SSI is helping Wirtgen advance digital milling
- Wirtgen’s most powerful cold milling machine
- Wirtgen’s WRC 240i rock crusher arrives in North America
The development team created software that connected the measurement equipment, digital construction data and the slipform paver’s control system.
“At the time, there was no measurement and control system that could truly satisfy the extremely high precision requirements of slab track construction. The development of the 3D interface between the measurement system and the machine was the decisive breakthrough, and formed the basis for all subsequent developments,” said Matthias Fritz, Application Manager for 3D control systems at Wirtgen GmbH.
The measurement system was used during construction of the high-speed rail link in 1999. On that project, up to six slipform pavers worked simultaneously without physical stringlines. Instead, the machines were guided entirely by a 3D control system.
That same year, Wirtgen began equipping its cold milling machines with the technology, which has since been continuously revised and upgraded.
Goodbye stringlines

The introduction of satellite-based global navigation satellite system (GNSS) technology and the increased integration of machine control into equipment systems helped advance the technology.
The goal was to simplify working procedures, reduce setup times and improve reliability on construction sites.
“The decisive step in the further development was the replacement of the conventional physical stringline with a virtual stringline and the integration of the control system in the machine. This enabled us to increase precision, productivity and operator comfort in equal measure,” Fritz said.
At Bauma in 2013, Wirtgen presented AutoPilot as the world’s first hybrid control system for slipform pavers. The system went on to win a Bauma Innovation Award at the event.
The current generation, AutoPilot 2.0, was introduced in 2018 and enables high-precision paving of offset and inset profiles, such as curbs, concrete safety barriers and road surface slabs, without requiring labour-intensive surveying or the setup and removal of physical stringlines.
Eliminating physical stringlines also provides practical advantages on the jobsite. The absence of stringlines creates more room for concrete delivery trucks and other equipment to move around the paver, improving access and reducing the risk of disrupting the paving alignment.
As well, the technology can account for existing infrastructure, such as water inlets, fire hydrants and streetlights. When creating a virtual stringline, operators can incorporate these obstacles into the digital alignment and make adjustments before paving begins.
“The purpose of technology is to make things easier for its users, not more complicated. That is why we develop solutions that are aligned with our customers’ needs and create real added value on the construction site,” Fritz said.
Today, standardized controller area network (CAN) bus interfaces support the use of a wide range of measurement systems. Depending on their requirements, customers can use systems from other providers while maintaining integration with their Wirtgen machines.
Driving digitization

AutoPilot 2.0 uses a digital 3D model to guide the slipform paver without relying on a physical stringline. The model can be imported from existing project data or created on the jobsite using Wirtgen’s Field Rover surveying equipment.
Two GNSS receivers mounted on the machine communicate with a reference station positioned on site. The system uses this information to automatically control the machine’s steering and cross-slope, following the planned paving alignment.
When a digital model is not available, operators can use the Field Rover and its tablet-based software to record measurement points along the intended route. The software then calculates a virtual stringline from the collected data, allowing paving operations to proceed without developing a complete 3D model in advance.
Wirtgen currently offers AutoPilot 2.0 for its SP 15i, SP 25i and SP 33 slipform pavers. The technology can also be retrofitted to compatible previously purchased machines.
With the planned integration of additional systems through Work Planner in the John Deere Operations Center, Wirtgen aims to extend its digital machine control capabilities to other areas of its equipment lineup.
After 30 years of development, the precise control of height, grade, slope, milling depth and steering remains a core focus for Wirtgen. The company continues to develop automation solutions intended to improve machine operation and further integrate digital technology into construction sites.













