CAT’s new smart creep feature maximizes concrete tool productivity

CAT smart creep feature being used on a job site.

Caterpillar has announced that it will soon be launching a smart creep feature for the full range of CAT D3 skid steer loaders (SSL) and compact track loaders (CTL) for operating CAT cold planer and wheel saw attachments.

Smart creep senses the load on the attachment and automatically adjusts the drive command to keep the cold planer or wheel saw running at the most productive speed.

A combination of attachment sensors and proprietary software optimally balances attachment load and machine speed to maximize productivity.

By continually sensing the load on the attachment, smart creep increases machine speed when encountering less resistance and automatically slows the machine when encountering higher load. Engine load remains constant, while the operator can monitor hydraulic pressure on the in-cab display panel.

According to CAT, smart creep takes the guess work out of setting the right creep speed for operating the attachment.

Without the aid of this feature, setting creep speed too fast can lead to stalling the attachment, and too slow of speed results in productivity loss.

New smart creep software smoothly and efficiently determines the optimal machine speed for cutting conditions.

With this new smart attachment feature from Caterpillar, the operator needs only to activate the standard creep control system and set the maximum creep speed on the advanced display inside the cab. Once the tool engages the cut, smart creep measures load on the attachment and adjusts the drive command automatically as cutting begins.

In the event of the cutter jamming or stalling, an auto reverse feature within smart creep quickly changes machine direction to allow the tool to clear the jam.

CAT smart creep feature being used on a job site.

Targeted availability for smart creep on CAT D3 SSL and CTL machines is the third quarter of 2022.

A field installation kit consisting of sensors and machine software for operating the new feature will be made available for existing fleet loaders and attachments.

Once commercially available, new cold planer and wheel saw purchases will be shipped from the factory with the required hardware installed, and new D3 SSL and CTL models will come smart creep ready from the factory.